Comments on: Do your products need CE marking?

By: mark

mark — Thu, 26 Jan 2012 16:07:13 +0000

Han

We manufacture composting toilets. Our versions with electrical components are CE certified under the LV and EMC directives. We also have a non-electric version with no electrical components. I assume that this product is not required to be CE certified since it is identical to the electrical model and neither the LV or EMC dirctives apply.

Looking for confirmation

thanks,
Mark

By: Han Zuyderwijk

Han Zuyderwijk — Sat, 07 Jan 2012 08:47:24 +0000

Hi Damian,

The Construction Products Directive 89/106/EEC could apply to adhesives and sealants. I recommend you to have a look at this directive.

By: Damian McCusker

Damian McCusker — Fri, 06 Jan 2012 14:48:34 +0000

Hi Han
On this issue , we manufacture / distribute adhesives and sealants, some for construction, sewer pipes etc.
Do we need CE mark?? please help??
thank-you in advance

By: Han Zuyderwijk

Han Zuyderwijk — Tue, 01 Nov 2011 08:46:59 +0000

Hi Dennis,

Thank you for your question. Please have a look at the EMC Directive. This directive could apply to your players, because they contain electronics (which are likely to cause EMI or be susceptible for EMI).

By: Han Zuyderwijk

Han Zuyderwijk — Tue, 01 Nov 2011 08:45:16 +0000

Alastair, I have sent you an email.

By: Dennis Paller

Dennis Paller — Mon, 31 Oct 2011 15:31:51 +0000

Hi Han, We are going to be producing some MP3 players in china that are battery operated. These are for temporary use and the battery cannot be changed nor is it rechargeable. Is this a product that requires CE marking?

By: Alastair Bark

Alastair Bark — Mon, 31 Oct 2011 09:34:37 +0000

Han, could you send an email to my address, then I can reply with the drawing attached.
Alastair

By: Han Zuyderwijk

Han Zuyderwijk — Mon, 31 Oct 2011 07:15:15 +0000

Can you email me a picture or drawings of the console?

By: Han Zuyderwijk

Han Zuyderwijk — Mon, 31 Oct 2011 07:13:31 +0000

Yes, perhaps the Construction Products Directive applies. I would have to study your product documentation to be able to give you definite a answer. Contact me if you need my help.
You may also want to search for product specific standards. The wind turbine will require CE, and perhaps there is a harmonized standard that covers the blades.

By: ASIER CONDE

ASIER CONDE — Thu, 27 Oct 2011 06:29:53 +0000

Dear Han,
We are manufacturers of wind turbine blades made of reinforced fiberglass and epoxy resin. I think we don’t require the CE Marking, but I would like to confirm this information with you.
I am not really sure in which group would be a wind turbine blade. Might be construction products, machinery or none of them?

Thank you very much for your help
Kind regards
Asier Conde